Steps for Replacing Molecular Sieve

Molecular Sieve

Nitrogen generator needs to replace molecular sieve regularly to ensure normal operation.

The steps are as follows:

Simply clean the site, cut off the gas and power, two people remove the head of the adsorption tower, two people remove all the pipes of the nitrogen generator, remove the waste in the adsorption tower, clean it up, check whether the top and bottom flow plates of the nitrogen equipment adsorption tower are damaged, and repair the damage in time.

All pipelines shall be purged with compressed air. The sealing rings of pneumatic valves shall be inspected for damage. In case of serious damage, the pneumatic valves shall be replaced. The filter of the air treatment part was renewed, and the activated carbon filter pipeline reconstruction was carried out simultaneously by one person.

Post time: Jun-24-2022