The products that serve the health needs of the population. According to WHO, these products should be available “at all times, in adequate amounts, in the appropriate dosage forms, with assured quality and adequate information, and at a price the individual and the community can afford”.

PSA Oxygen Generator

  • Glass PSA Oxygen Generator Plant

    Glass PSA Oxygen Generator Plant

    Composition of PSA Oxygen Generator Plant

    Compressed air purification Set

    The air compressed by air compressor and flow into the purification set, and most of the oil, water and dust are removed by the pipeline filter, then further removed by the freeze dryer and the fine filter, finally, the ultra fine filter will carry on the deep purification. According to the working conditions of the system, a set of compressed air degreaser is specially designed to prevent the possible penetration of trace oil and provide sufficient protection for molecular sieve. The rigorous design of air purification sets ensure the service life of molecular sieve. The purified clean air can be used for instrument air.

  • Pharmaceutical PSA Oxygen Generator Plant

    Pharmaceutical PSA Oxygen Generator Plant

    Process of PSA Oxygen Generator Plant

    According to the principle of pressurized adsorption, depressurization and desorption, the PSA oxygen generator plant is an automatic equipment that uses zeolite molecular sieve as adsorbent to adsorb and release oxygen from the air. Zeolite molecular sieve is a spherical white granular adsorbent with micropores on the surface and inside. The micropores characteristics enable to make the O2 and N2 kinetic separation. The kinetic diameters of the two gases are slightly different. N2 molecules have a faster diffusion rate in the micropores of zeolite molecular sieve, and O2 molecules have a slower diffusion rate. The diffusion of water and CO2 in compressed air is similar to nitrogen. Finally, oxygen molecules are enriched from the adsorption tower.

  • Metallurgy  PSA Oxygen Generator Plant

    Metallurgy PSA Oxygen Generator Plant

    Principle of PSA Oxygen Generator Plant

    There is 21% oxygen in the air. The principle of PSA oxygen generator plant is to extract oxygen to high concentration from the air by physical methods. Therefore, the product oxygen will not be doped with other harmful substances, and the oxygen quality depends on the air quality and better than air.

    The main parameters of the PSA oxygen generator plant are: power consumption and oxygen production, and the oxygen production is usually reflected by the output oxygen flow and concentration. In addition, the important parameters also include: the working pressure of the PSA oxygen generator plant and the pressure of the oxygen output port.

  • Papermaking PSA Oxygen Generator Plant

    Papermaking PSA Oxygen Generator Plant

    Introduction of PSA Oxygen Generator Plant

    Oxygen generator is an equipment that uses air as raw material to produce the oxygen, and the oxygen concentration can reach 95%, which can replace bottled oxygen. The principle of industrial oxygen generator plant use PSA technology. Base on the different condensation points of various components in the air, compress the air with high density to separate the gas and liquid, then distillation to obtain oxygen. Large air separation equipment is generally designed to be high, so that oxygen, nitrogen and other gases can fully replace the temperature and rectify in the process of climbing and falling. The whole system consists of compressed air purification assembly, air storage tank, oxygen and nitrogen separation device and oxygen buffer tank.